Equipment finance

Forklifts, excavators, CNC machines, kitchen and medical gear, gym fit-outs: how lenders on our panel class each one, what the classes cost, and the structure that fits the asset.

How much do you need?
5.0 on Google, 2 reviews A broker calls within the hour, Mon to Fri, 8am to 7pm Experienced commercial brokers, 80+ lenders on the panel No credit check to see your options

General information only

By Ecommerce Loans · 14 October 2026

Equipment finance is a loan or lease secured on the machine itself, so the lender’s risk sits in the equipment, not your property. Lenders on our panel class equipment by how easily it resells: primary machinery such as forklifts and excavators from about 7.5% over up to 7 years, tertiary gear such as fit-outs from about 9.5% to 12%.

On our panel it runs from about 7.5% for wheeled and recognised-make equipment to about 20% for specialised plant with a specialist lender, over two to seven years, with the GST claimable on a chattel mortgage from the first BAS.

The make, the age and how easily the lender could resell it decide the price, not the industry you are in.

How do lenders class equipment?

Into two or three classes by how easily they could resell it, and the class sets the rate, term and deposit before the lender has looked at your business. Primary equipment (forklifts, excavators, loaders, recognised makes with a used market) prices from about 7.5% over up to 7 years; secondary from about 9.5% over up to 5 years; tertiary (fit-out, fixed plant, software, gym gear) from about 9.5% to 12%.

ClassTypical equipmentPanel rate fromTerm and age limit
PrimaryTrucks, trailers, utes, forklifts, excavators and other yellow goods, tractors and headers, recognised-make machineryAbout 7.5%Up to 7 years; 10 years old at end of term for vehicles, 15 for most other primary equipment
SecondaryCNC machines, presses, packaging lines, commercial kitchen equipment, medical and dental equipment, IT with resale valueAbout 9.5%Up to 5 years; 12 years old at end of term on most cards
TertiaryFit-out, fixed plant, software, gym and fitness equipment, bespoke or installed gearAbout 9.5% to 12.5%, higher with a specialist lenderUsually 3 to 5 years; often a 20% deposit where there is no property

Ranges are rounded from the rate cards on our panel, reviewed 12 October 2026, and are indicative only. The business loan rates page shows every product by profile, and large business loans covers facilities above $500,000 where several assets go on one line. For the repayment on a specific machine, use our equipment finance calculator.

What are equipment finance rates in Australia right now?

From about 7.5% to 9% for a prime borrower on new equipment from a dealer, 9.5% to 12.5% near prime, and 16% to 20% with a specialist lender, indicative from the panel’s current rate cards. The asset’s age, a private sale and the absence of property each add to the rate.

What would $100,000 of equipment cost a month?

On $100,000 over five years, repayments run from about $2,040 a month for the strongest profile to about $2,539 a month through a specialist lender. The gap is the price of risk, and where you land depends mostly on time trading, credit score and whether there’s property behind the deal. Primary-class equipment with a strong resale market prices at the top of the table. Specialised or installed equipment prices a tier lower and may need a deposit.

Prime
7.5% to 9%
indicative rate
$2,040 a month
$22,378 total interest, worked at 8.25%
2+ years ABN, clean credit, and a new or near-new asset bought from a dealer.
Near-prime
9.5% to 12.5%
indicative rate
$2,174 a month
$30,455 total interest, worked at 11%
An older or private-sale asset, no property to back the deal, or a younger ABN.
Specialist lender
16% to 20%
indicative rate
$2,539 a month
$52,361 total interest, worked at 18%
Recent defaults, a low credit score, or an asset most lenders won’t take.

Indicative only, not a quote. Ranges are drawn from the current rate cards of lenders on our panel, reviewed 12 October 2026, and rounded. They’re APRs, not simple rates (why that matters). Compare rates across every product. Repayments are principal and interest on a reducing balance, with no balloon, and exclude establishment and account fees. Your rate depends on the lender’s assessment of your business. Ecommerce Loans is a finance broker, not a lender.

Chattel mortgage or lease: which structure fits the equipment?

A chattel mortgage means you own the equipment from delivery, claim the GST on the purchase price in your next BAS, and claim depreciation and, where it applies, the instant asset write-off. A lease means the financier owns it and you deduct the rent, which suits equipment you will replace before it wears out. Our chattel mortgage versus finance lease comparison runs the GST and tax timing in detail.

The short version: own the things that hold their value and that you will keep, such as trucks, excavators and heavy machinery. Lease the things that date, such as coffee machines, IT and some medical technology. A balloon on a chattel mortgage lowers the monthly repayment on long-life equipment, at the cost of a lump sum or a refinance at the end.

Forklift finance

Forklifts are primary-class equipment on every card we hold, so a new Toyota 8FG or Crown counterbalance finances at the sharpest end of the panel, from about 7.5%, over up to five years. Electric and LPG models are treated the same; the lender cares about hours and age, not the fuel. A used forklift finances with an age limit at the end of the term, and a fleet of several can go on one facility.

Warehousing and wholesale businesses often pair the forklift with racking, which is also financeable because it is removable and holds resale value, unlike most fit-out. Our wholesale and trade page covers the cash flow side of the same business.

Excavator and earthmoving finance

Excavators, loaders, skid steers and the trucks that move them are yellow goods, the primary class with the longest terms. A new Cat 320 or Komatsu PC210 finances over up to seven years from about 7.5%; a used machine from a dealer or a private sale is fine with the usual age limit, and lenders look at hours as closely as age. A balloon is common on long-life machines, and a signed contract or a letter from the head contractor is what gets a young operator approved.

The harder part in construction is the cash flow product next to the machine, not the machine itself. Our trades and construction page explains why.

Lender-by-lender rates for yellow goods, by machine age, are on our machinery finance page.

Machinery and manufacturing equipment

CNC machines, presses, packaging lines and food processing plant are usually secondary class: financeable at good rates when they are a recognised make that another operator would buy, harder when they are bespoke or bolted into the building. Lenders want the quote, the serial number and often a site photo, and some ask for a 20% deposit on installed plant. The manufacturing page covers how the stock cycle changes the application.

Kitchen, cafe and hospitality equipment

Ovens, cold rooms, dishwashers and a La Marzocco for the counter are financed every week on our panel, but hospitality is one industry where leasing often beats owning: the equipment dates, the venue may move, and a rental keeps the balance sheet clean. Fit-out itself, the joinery and the services, is tertiary class or a separate fit-out loan. Our hospitality and retail page covers both, and the insight on leasing versus buying hospitality equipment runs the numbers.

Medical, dental and veterinary equipment

Dental chairs, imaging, lasers, autoclaves and ultrasound are secondary class, and several lenders on our panel run a professionals product for registered practitioners that approves core practice equipment and vehicles up to about $250,000 on registration, two years of ABN and GST, and either property or a 20% deposit, without financials. The healthcare page explains who qualifies and how fit-out is treated differently.

Gym, fitness and other specialised equipment

Treadmills, rigs and pin-loaded machines are financeable but sit in the tertiary class on most cards, because a second-hand gym floor has a thin resale market. Expect a shorter term, a rate a tier or two above a vehicle, and sometimes a deposit, and note that a couple of unsecured lenders on our panel treat fitness as a non-preferred industry. The same logic applies to any installed or bespoke equipment: the more specific it is to your business, the more the lender relies on your business rather than the asset.

What does an equipment finance broker do?

Matches the asset to the lender. Lenders class and exclude equipment differently: Resimac’s guide excludes hospitality and gym equipment that other lenders fund, Westlawn does not fund tertiary equipment at all, and Quest has no asset age limit. The same machine can price very differently from one card to the next.

We compare the cards on our panel, choose the lender whose asset class, age limit and deposit rules suit the equipment and the business, and submit one application. No upfront fees to enquire or apply; the lender pays a commission at settlement, built into the loan’s pricing.

What does an equipment finance application need?

  • The quote or invoice from the dealer or seller, with the serial number for anything over a few thousand dollars.
  • ABN and GST registration. Most cards want two years for the streamlined paths; some take six to twelve months for primary equipment, and the professionals and agri products have their own rules.
  • Bank statements or financials, unless the amount and your profile fit a low doc matrix: property ownership or a 20% deposit, a clean file and a comparable loan paid on time will often get a primary asset approved under about $250,000 without them. See low doc business loans.
  • Director’s guarantee. Standard on every card. Property is not required for primary equipment but lowers the rate and lifts the limit.

No upfront fees to enquire or apply. Ecommerce Loans acts as a referrer: applications are assessed and facilitated by the holder of Australian Credit Licence 530764.

Compare equipment finance rates by lender

Rates from lenders on our panel, taken from each lender’s current rate guide or website. The lowest rates go to the strongest profiles; what you’re offered depends on your business. Where a lender doesn’t publish a rate, it’s quoted on your profile.

Every lender shown is on our panel. Rates checked 13 November 2026. Indicative only and subject to formal approval.

LenderProductRate
Liberty Commercial Motor LoanFixed rate, balloon available
Amount Up to $100kTerm Up to 7 yearsBest for Cars and utes, including start-ups and low doc
6.79% to 17.99%p.a.
BOQ Equipment FinanceHire purchase, lease or chattel mortgage
Amount $20k+Term 3 to 5 yearsBest for New vehicles and plant up to 3 years old
from 7.25%p.a.
Resimac Commercial Auto and EquipmentLow, lite or full doc
Amount Up to $450kTerm Fixed termBest for Established, property-backed businesses
from 7.54%p.a.
Dynamoney Asset and Equipment FinanceCars, trucks, yellow goods, plant
Amount Up to $250kTerm Fixed termBest for Vehicles and machinery, 2+ years ABN
7.55% to 12.95%p.a.
Westpac Business Car and Equipment LoansFixed rate
Amount From $15kTerm 2 to 5 yearsBest for Dealer vehicles and trucks
from 7.98%p.a.

Rates are taken from each lender’s current broker rate guide or public website on the date shown and may have changed. They are indicative only, the lowest rates go to the strongest profiles, and every application is subject to the lender’s formal assessment and approval. Ecommerce Loans is a finance broker, not a lender. Enquiries are introduced to the holder of Australian Credit Licence 530764, who has access to the lenders shown to submit applications on your behalf. There are no upfront fees to enquire or apply.

When is equipment finance the wrong call?

When the dealer or manufacturer is offering subsidised finance on a new machine, which is often cheaper than anything on our panel; take it, and we will say so. When the equipment is for work you hope to win rather than work you have won, because the repayments start before the revenue does.

And when the real problem is cash flow, in which case a machine on finance adds a fixed cost to a business that needs flexibility. Say so on the call. We would rather tell you to wait than fund a problem.

Sources: lender rate cards and product guides on file, reviewed 12 October 2026; ATO, Depreciation and capital expenses and allowances (instant asset write-off, updated 28 August 2026). General information only, not tax advice.

Frequently asked questions

Nothing in practice. Equipment loan, machinery finance and plant finance are all the same conversation: money secured on the equipment, repaid over two to seven years. The real choice is the structure, a chattel mortgage where you own the asset or a lease where the financier does, and that turns on tax and how long you will keep it.
From about 7.5% a year on our panel for a new or near-new recognised make with a strong resale market, about 9.5% to 12.5% for a business building a track record or an older or specialised asset, and 16% to 20% with a specialist lender. Rates are indicative and subject to approval.
Yes. Most lenders on our panel finance used equipment with an age limit at the end of the term, usually 10 years for vehicles and 12 to 15 years for other equipment, at a small loading. Private sales are accepted with an invoice, proof of ownership and sometimes an inspection, and add about a point on some cards.
Often, because the equipment is the security. Several lenders on our panel take businesses under two years old for primary equipment, from about 9% with property and 12% to 14% without, and some want a 20% deposit where there is no property. See our startup business loans page.
If you own the asset, which you do under a chattel mortgage from the day it is delivered. The write-off attaches to ownership, not to how you paid, so a leased asset is deducted as rent instead. Your accountant can confirm how the limit applies to your turnover and the asset.
Ecommerce Loans

Commercial finance brokers for Australian businesses. Every enquiry goes to an experienced commercial broker, who calls back within the hour, Monday to Friday, 8am to 7pm.